|
|
|
|
|
|
|
|
|
User Interface |
|
|
|
|
|
Specific Features |
|
|
|
Function |
Details |
Camera Input |
2 Channel (NTSC, RS-170 selectable) |
Standard Line |
Cross (H, V Line) |
Red & Blue, Movable(X,Y) & Rotationalbe(θ) |
Circle |
Possible modification of Circle Size |
Possible modification of Circle Size |
Pattern Matching (circle, cross, rectangle etc) |
Calibration |
Input the distance between cross standard
lines (Red & Blue) -> Calculate the distance per pixel |
Distance Measurement |
Measurement of the distance between
standard line and mark center line (Unit: pixel or μm) |
Screen Configuration |
2-channel or 1-channel full screen is supported. |
|
|
|
|
Function |
|
|
► Camera Selection |
In “Camera Type” and “Channel” at the upper part, the kind and channel of camera may be selected. |
|
|
►Standard Line Registration |
Using the Mark button at the upper part on the screen, the standard cross lines (Red & Blue) and circle may be
registered or cancelled. |
|
|
► Movement of Standard Line |
Standard line may be moved to X, Y, and θ direction using the jogger at the lower part on the screen and the
moving distance may be adjusted by inputting the value under the jogger button.
The size of circle may be changed by inputting the value in the Circle Diameter box at the upper part on the screen. |
|
|
► Screen Change |
When clicking “left camera” or “right camera” button at the upper part on the screen, corresponding camera image is enlarged; when clicking it again, the screen returns to previous status.
When double clicking the image screen, the camera image is changed to full screen; when double clicking again, the screen returns to previous status. |
|
|
► CalibrationClick |
“left camera” or “right camera” button at the upper part on the screen to open Channel 1 Screen, click “Calibration”
button at the upper part, and input the X-axis distance between the Red and Blue standard lines. Calculate and apply
the distance per pixel based on the inputted value. |
|
|
► Mark Search |
Click “left camera” or “right camera” button at the upper part on the screen to open Channel 1 Screen, click “Match”
button at the lower part on the screen, and select the quadrilateral area that contains corresponding mark by the
method of Drag & Drop to finish Automatic Mark Searching.
Click “Apply” button at the lower part to confirm the calculated position values in the screen at the lower part.
|
|
|
► Conversion of Distance Unit |
The unit of displayed distance value may be converted using “pixel” or “mm” button at the lower part.
|
|
|
► Standard Point Registration |
After Mark Searching, click “Apply” button at the lower part to register the current position of the mark center as the
standard point. When clicking “+” (Red or Blue) button at the lower part, corresponding standard line moves to the
position of standard point.
|
|
|
|
|
Description of Data value |
|
|
► “Left Camera” & “Right Camera |
The X and Y distances between Red and Blue, which are the standard lines on the screen of each camera, are displayed.
|
|
|
► “Center” |
Absolute coordinators of mark center (the coordinates of the left top on the screen are 0,0)
|
|
|
► “Template Center” |
Absolute coordinators of set standard line (the coordinates of the left top on the screen are 0,0)
|
|
|
► “Movement” |
Coordinates between the set standard line and mark center
|
|
|
|
Specific Features |
|
|
|
Item |
Contents |
Camera Input |
2 Channel (640*480) |
Mark Search |
Pattern Matching |
O/S |
Embedded XP |
CPU |
Pentium M 1.6GHz |
Memory |
512 M byte |
HDD |
30 G byte |
|
|
|
|
|
|